Overview
Project website | www.klipper3d.org |
---|---|
Instructions for translators | The code blocks are included in the Gettext files in case if some comments need to be translated. You can add comments as well. For code blocks without comment, please flag them as The Gettext and markdown files in docs/locales are specific for languages. Check contributing for current guidelines. To merge a translation into the main Klipper repository, certain requirements have to be met. We are still determining the requirements and no merging is planned. - Yifei Ding |
Project maintainers | kingu dingyifei KevinOConnor Neko-vecter |
Translation license | GNU General Public License v3.0 or later |
Translation process |
|
Source code repository |
https://github.com/Klipper3d/klipper-translations/
|
Repository branch | translations |
Last remote commit |
locales: Translated using Weblate (Czech)
813b905e8
vvojtech1564 authored 6 days ago |
Last commit in Weblate |
locales: Translated using Weblate (Czech)
153b802bd
vvojtech1564 authored a week ago |
Weblate repository |
https://hosted.weblate.org/git/klipper/readme/
|
File mask | docs/locales/*/LC_MESSAGES/Config_Reference.po |
String statistics
Strings percent | Hosted strings | Words percent | Hosted words | Characters percent | Hosted characters | |
---|---|---|---|---|---|---|
Total | 14,624 | 861,856 | 5,598,368 | |||
Source | 457 | 26,933 | 174,949 | |||
Approved | 1% | 91 | 1% | 98 | 1% | 1,242 |
Waiting for review | 20% | 3,028 | 15% | 139,017 | 16% | 906,142 |
Translated | 24% | 3,576 | 19% | 166,048 | 19% | 1,082,333 |
Needs editing | 1% | 7 | 1% | 354 | 1% | 2,320 |
Read-only | 3% | 457 | 3% | 26,933 | 3% | 174,949 |
Failing checks | 1% | 4 | 1% | 8 | 1% | 87 |
Strings with suggestions | 1% | 20 | 1% | 374 | 1% | 2,599 |
Untranslated strings | 75% | 11,041 | 80% | 695,454 | 80% | 4,513,715 |
Quick numbers
Trends of last 30 days
eziosantellocco97
Translation added |
|
eziosantellocco97
Contributor joined |
Contributor joined
8 hours ago
|
None
Changes committed |
Changes committed
a week ago
|
MickCZ
Suggestion removed |
|
MickCZ
Translation changed |
|
MickCZ
Contributor joined |
Contributor joined
a week ago
|
None
Changes committed |
Changes committed
3 weeks ago
|
None
Changes committed |
Changes committed
3 weeks ago
|
mrey
Translation added |
|
mrey
Translation added |
|
#speed: 50
# The speed (in mm/s) of non-probing moves during the calibration.
# The default is 50.
#horizontal_move_z: 5
# The height (in mm) that the head should be commanded to move to
# just prior to starting a probe operation. The default is 5.
calibrate_start_x: 20
# Defines the minimum X coordinate of the calibration
# This should be the X coordinate that positions the nozzle at the starting
# calibration position. This parameter must be provided.
calibrate_end_x: 200
# Defines the maximum X coordinate of the calibration
# This should be the X coordinate that positions the nozzle at the ending
# calibration position. This parameter must be provided.
calibrate_y: 112.5
# Defines the Y coordinate of the calibration
# This should be the Y coordinate that positions the nozzle during the
# calibration process. This parameter must be provided and is recommended to
# be near the center of the bed