Overview
String statistics
Strings percent | Hosted strings | Words percent | Hosted words | Characters percent | Hosted characters | |
---|---|---|---|---|---|---|
Total | 138,555 | 3,579,530 | 24,192,657 | |||
Source | 4,431 | 112,053 | 757,750 | |||
Approved | 1% | 814 | 1% | 5,165 | 1% | 43,959 |
Waiting for review | 22% | 30,275 | 19% | 692,189 | 19% | 4,659,842 |
Translated | 25% | 35,511 | 22% | 809,306 | 22% | 5,461,367 |
Needs editing | 1% | 187 | 1% | 2,543 | 1% | 19,519 |
Read-only | 3% | 4,422 | 3% | 111,952 | 3% | 757,566 |
Failing checks | 1% | 744 | 1% | 12,475 | 1% | 93,776 |
Strings with suggestions | 1% | 379 | 1% | 9,711 | 1% | 63,516 |
Untranslated strings | 74% | 102,857 | 77% | 2,767,681 | 77% | 18,711,771 |
Quick numbers
Trends of last 30 days
eziosantellocco97
Translation added |
|
eziosantellocco97
Contributor joined |
Contributor joined
5 hours ago
|
eziosantellocco97
Translation added |
|
eziosantellocco97
Contributor joined |
Contributor joined
5 hours ago
|
None
Changes pushed |
Changes pushed
3 days ago
|
None
Changes committed |
Changes committed
3 days ago
|
None
Changes committed |
Changes committed
3 days ago
|
None
Changes committed |
Changes committed
3 days ago
|
MickCZ
Translation added |
|
MickCZ
Translation added |
|
dingyifei
Announcement posted |
I've pulled upstream doc changes to the translations branch. Some strings are replaced with new ones. You will need to review and (possibly) translate them again like going through the untranslated strings. 2 years ago |
dingyifei
Announcement posted |
If https://github.com/KevinOConnor/klipper/pull/4577 merge into Klipper and I pull the changes into Klipper-translations, some source strings will be replaced and the translation might disappear from them. These should be easily restorable from translation memory(from the automatic suggestion or whatever it will be) If it doesn't work, I'll manually edit the Gettext files. 2 years ago |
dingyifei
Announcement posted |
Commit frequency was changed to 24 Hours There are still some issues in the https://github.com/mondeja/mdpo/issues/152 https://github.com/mondeja/mdpo/issues/153 2 years ago |
dingyifei
Announcement posted |
I'm still testing the new configuration, please do not submit any translation at the moment.
|
#speed: 50
# The speed (in mm/s) of non-probing moves during the calibration.
# The default is 50.
#horizontal_move_z: 5
# The height (in mm) that the head should be commanded to move to
# just prior to starting a probe operation. The default is 5.
calibrate_start_x: 20
# Defines the minimum X coordinate of the calibration
# This should be the X coordinate that positions the nozzle at the starting
# calibration position. This parameter must be provided.
calibrate_end_x: 200
# Defines the maximum X coordinate of the calibration
# This should be the X coordinate that positions the nozzle at the ending
# calibration position. This parameter must be provided.
calibrate_y: 112.5
# Defines the Y coordinate of the calibration
# This should be the Y coordinate that positions the nozzle during the
# calibration process. This parameter must be provided and is recommended to
# be near the center of the bed